PCD tipped circular saw blade tooth regrinding.

Application: 

Furniture production, bathroom cabinet production, wardrobe production

Cutting materials: 

Solid wood, plywood, particleboard, fiberboard, density board,complex board, veneer board

Applicable equipment: 

Cutting board saw, reciprocating saw,electronic material cutting saw, slotting saw, edge sealing saw

Diamond

The use of high-quality diamond material cutter head reduces cutting resistance and prolongs the service life of the saw blade, which is 60 times longer than the life of ordinary saw blade.

Silencer

Effectively reduces the noise present during the cutting process.

Triple chip tooth

The reasonable tooth shape design ensures the smoothness of the cutting material.

Tension ring

Laser Cut expansion slots allow blade to expand and contact during heated operation.

The wiper-slots inserted in the body of the blade prevent the closure of the cut.

This saw blade is designed with chip limiting device, without possibility of kick back.Sutable for ripping cut softwood and hardwood,panels,as well as single sides veneered or plastic-coated board, without possibility of kick back, especially appropriated for cutting boards, in carpentry works& construction site.

Safety instructions

1. The machine must be in good conditions, free of vibrations.

2. The flanges used to secure the blade must be of the same diameter,at least 1/3 of the blades diameter.

3. The flanges must be parallel to each other.Also ,check tolerances on diameters, sides and concentric ,by using a clock gauge.

4. The spaces must be perfectly parallel.

5. The spaces must be perfectly straight and with and H7 tolerance.

6. After continuous use,remove the blade and clean it.making sure to get rid of resin build up with the appropriate solvents.

7. The blades must be sharpened as soon as they become dull,maintaining the original tooth angles.

8. For sharpening, always use the correct grinding wheel ad plenty of cooling liquid.

9. Maximum re-boring of the blade is 20mm of the original bore size,Above this value, the blade will loose its original turning and overall performance will be affected.

10. Always keep spacers and flanges clean.

11. When sharpening, the shoulder of the teeth must not be lowered more than needed,This operation must be done with appropriate precision machinery and never by hand.This is the risk of breaking the tip or upsetting the blade balance.

12. On ripping machines, the feeding track must be leveled with the foxed table.

13. Before starting the cut of the material,make sure the blade is correctly locked according the machine's specification.